Brow Liquid Dye Complete Combo Kit & Airbrush Bundle Kit

For maximum stain results leave on for 15 minutes.
For professional use only.

Important Note: Complete a patch test before each application: 1. Shake bottle well before use. 2. Mix Liquid Dye Without Henna and Airbrush Liquid Activator 3% with a 1:1 ratio. 3. Apply a tiny amount of the mixture to a small area, either on the inner bend of the elbow, or behind the ear. 4. Allow to dry and leave uncovered 2-3 days. If no irritation or rash occurs during this time, the chance of a reaction during treatment is reduced, but is never certain.  If any sign of irritation or rash occurs, wash the area thoroughly and do not carry out the treatment and stop using this product immediately.

Preparation of Brow stain: Shake well before use. Mix equal parts Liquid Dye Without Henna & One V Salon Airbrush Liquid Activator 3% into mixture using a One V Salon Tint and Mapping Brush or an application stick. The mixing ratio is 1:1.

Directions for use: Staining brows: As per above, complete a test patch prior to treatment.

Step 1: Prep brows to remove all makeup - use Lash V Brow Exfoliating Scrub followed by Lash V Brow Conditioning Cleanser to ensure brows are dry and oil free.

Step 2: The eyebrows should be dry and free of all oils and sebum (as this can create a barrier against the Dye) and will stop it applying to the surface layer of the skin or the hair.

Step 3: Before treatment make sure the client has closed their eyes. Then using an applicator stick or brush, apply the mixture to the eyebrows with care and precision to ensure a clean result.

Step 4: Ensure the mixture is placed precisely in the desired shape you want to achieve, as the stain will start to stain the skin instantly (otherwise it can slightly stain the skin in the wrong areas).

Step 5: Application time is between 5-12 minutes. We recommend an average of 10 minutes on most customers depending on the intensity the customer is wanting. Please monitor the Liquid Dye at all times to see how colour is processing. Pro Tip: Remove the front of the brow after a couple of minutes for an ombre effect.

Step 6:  Use Lash V Brow Conditioning Cleanser and apply Lash V Brow Nourishing oil to hydrate eyebrows after treatment.

Keep Out Of Reach Of Children. Safety Direction: Warning – This product contains ingredients which may cause skin sensitisation to certain individuals, and when used for eyebrow tinting may cause injury to the eye. A preliminary test patch according to the accompanying directions should be made before use. Over Repeated exposure may cause sensitisation. Avoid contact with eyes. Avoid contact with skin. Avoid breathing vapour. Refer to SDS prior to use. FIRST AID: For advice, contact a Poisons Information Centre (Australia PH: 131126. New Zealand 0800 764 766) or a doctor at once. Urgent hospital treatment is likely to be needed. If swallowed, do NOT induce vomiting. If in eyes wash out immediately with water. If skin or hair contact occurs, remove contaminated clothing and flush skin and hair with running water. One V Salon is not responsible for the misuse of this product.

SDS Reports - Please print and keep near you before treatments. Click to see all SDS reports here.

SET UP DIRECTIONS:

Ensure airbrush machine is charged before use - charge for 90 mins. 

Begin by assembling the metal cup onto the Airbrush Machine.

Utilize the Output Gear to regulate the flow rate as needed.

Adjust the air pressure modes by pressing the designated button on the airbrush machine; a single press activates 20 PSI power, while a subsequent press engages 30 PSI power.

DIRECTIONS FOR USE:

Before use, read all instructions of Liquid Dye, and Airbrush Liquid Activator.

Always place Silicone Brow Shaping Stencils on eyebrows before setting up. (Please refer to the product instructions and cautions before use).

Prepare the solution by mixing in a mixing bowl Liquid Dye 1:1 ratio with the Airbrush Liquid Activator. You will need minimum 7 drops of Liquid Dye and 7 drops of Airbrush Liquid Activator.

Once thoroughly mixed, transfer the solution into the metal cup.

We recommend testing the Airbrush Machine before applying to eyebrows. Set the Airbrush Machine to your preferred pressure and test spray onto a clean, dry cotton pad to check shade and consistency of the spray. This will help you determine the best distance to apply the mixture to the eyebrow.

Once confident and you are ready to apply to the eyebrows, ensure eyes are closed when spraying across brows. Also you must avoid contact with the eye area (please refer to the product instructions and cautions before use). Hold 5cm away from clients' brows, hold down trigger nozzle. Starting from the tail of the brow heading to the front of the brow, spray a light layer and reapply if required. Make sure the brow is well covered with the mixture to create a bold look.

If you see any mixture that is outside of the brow shape from Airbrushing, use Dye Remover (please refer to the product instructions and cautions before use) This will remove unwanted colour on the skin.

Allow the mixture to sit on the brows for 10-15 minutes. Maximum 15 minutes. Depending on the intensity of the look you want to create.

Remove Silicone Brow Shaping Stencils & wipe away the mixture from the brows (please refer to the product instructions and cautions)

If there is any mixture that has gone outside of your brow shape, apply a small amount of Dye Remover to a micro brush or a cotton tip, and gently wipe the area. Repeat if needed. Wash off residue with water.

Time to show off your new stunning brows!

CLEANING DIRECTIONS:

After each application, ensure thorough cleaning of the Airbrush Machine. Disassemble the metal cup from the Airbrush Machine and rinse it under running water. Attach the large plastic cup onto the machine, fill it with water, and activate the machine. Apply pressure to the nozzle with a cotton ball while gradually pulling the trigger to expel water until it runs clear. Repeat this process twice more. Subsequently, remove the cotton ball and dispense water into a bowl. Detach the cup and reinstall the metal cup. Continue spraying until the water dispensed is clear of impurities.

MAINTENANCE DIRECTIONS:

Disassemble the housing to access the internal components.

Loosen the needle nut by rotating it.

Extract the elongated built-in needle.

Thoroughly clean the needle using a lint-free cloth.

Allow all components to air dry completely before proceeding with reassembly, ensuring careful attention to detail during the process.

CHARGING DIRECTIONS:

Connect the USB charging cable to the designated port on the Airbrush machine, and the opposing end to a power adaptor or computer. Never leave Airbrush Machine unattended when charging. 

CAUTION:

This Airbrush Machine is designed exclusively for use with One V Salon Liquid Dye and One V Salon Airbrush Activator only. DO NOT use Developer Cream 3% as it will damage the Airbrush Machine, so it is strictly prohibited.

WARRANTY INFORMATION:

This product is accompanied by a 6-month warranty period, which safeguards against manufacturing defects or instances where the machine fails to power on or initialize. However, please be aware that the warranty does not extend to issues related to general operation, as these typically stem from improper cleaning procedures, incorrect assembly, or the usage of incompatible products.