AIRBRUSH LIQUID ACTIVATOR 100ml + LIQUID DYE 15ml BUNDLE SAVER

Complete a patch test before each application: 1. Shake bottle well before use. 2. Mix Liquid Dye Without Henna and Airbrush Liquid Activator 3% with a 1:1 ratio. 3. Apply a tiny amount of the mixture to a small area, either on the inner bend of the elbow, or behind the ear. 4. Allow to dry and leave uncovered 2-3 days. If no irritation or rash occurs during this time, the chance of a reaction during treatment is reduced, but is never certain.  If any sign of irritation or rash occurs, wash the area thoroughly and do not carry out the treatment and stop using this product immediately.Storage:
Shake well before use. Mix equal parts Liquid Dye Without Henna & Airbrush Liquid Activator 3%. The mixing ratio is 1:1.

DIRECTIONS FOR USE:

1. Before use, read all instructions of Liquid Dye, and Airbrush Liquid Activator.

2. Always place Silicone Brow Shaping Stencils on eyebrows before setting up. (Please refer to the product instructions and cautions before use).

3. Prepare the solution by mixing in a mixing bowl Liquid Dye 1:1 ratio with the Airbrush Liquid Activator.
You will need minimum 7 drops of Liquid Dye and 7 drops of Airbrush Liquid Activator.

4. Once thoroughly mixed, transfer the solution into the metal cup.

5. We recommend testing the Airbrush Machine before applying to eyebrows. Set the Airbrush Machine to your preferred pressure and test spray onto a clean, dry cotton pad to check shade and consistency of the spray. This will help you determine the best distance to apply the mixture to the eyebrow.

6. Once confident and you are ready to apply to the eyebrows, ensure eyes are closed when spraying across brows. Also you must avoid contact with the eye area (please refer to the product instructions and cautions before use).

Hold 5cm away from clients' brows, hold down trigger nozzle. Starting from the tail of the brow heading to the front of the brow, spray a light layer and reapply if required. Make sure the brow is well covered with the mixture to create a bold look.

7. If you see any mixture that is outside of the brow shape from Airbrushing, use Dye Remover (please refer to the product instructions and cautions before use) This will remove unwanted colour on the skin.

8. Allow the mixture to sit on the brows for 10-15 minutes. Maximum 15 minutes. Depending on the intensity of the look you want to create.

9. Remove Silicone Brow Shaping Stencils wipe away the mixture from the brows (please refer to the product instructions and cautions)

10. If there is any mixture that has gone outside of your brow shape, apply a small amount of Dye Remover to a micro brush or a cotton tip, and gently wipe the area. Repeat if needed. Wash off residue with water.

11. Time to show off your new stunning brows!

Warning: Harmful if swallowed.

Store in a cool place away from light. Between 15- 25° C
(59-77°F) and close bottle immediatley after use.